Thermador HGEW36FS manual Operation

OPERATION

IMPORTANT: The most effective method of removing vapors produced during cooking is to:

❑Switch the ventilator ON prior to cooking or as soon as you begin cooking.

❑Switch the ventilator OFF

a few minutes after you have finished cooking.

❑Set the glass plate in cooking position.

cooking position

Display for fan setting Fan follow-on

Light	Reduce fan	Fan ON and
	speed	increase speed
Fan OFF

Acoustic signal:

❑When a button is pressed, this is verified by an acoustic signal.

Switching the fan ON

❑Press the + button or pull out the filter drawer.

Setting the required fan speed:

❑Press the + button.

The fan speed is increased by one step.

❑Press the – button.

The fan speed is reduced by one step.

Switching the fan OFF:

❑Press the 0 button.

The displayed { goes out shortly afterwards.

Or:

❑Keep pressing the – button until the fan

switches off.

The displayed { goes out shortly afterwards.

Intensive setting:

Maximum power is obtained at the intensive setting.

It is only required for short intervals.

❑Keep pressing the + button until a ç appears in the display.

❑If the intensive setting is not cancelled by hand, the

fan will automatically switch back to step } after 10 minutes.

Fan follow-on:

❑Press the ! button or push in the filter drawer.

The fan runs for 10 minutes at setting 1. At the same time a dot flashes in the display.

Then the fan switches off automatically.

Switching off the acoustic signal:

❑Simultaneously press buttons 0 and + until a signal is emitted after approx. 3 seconds.

Switching on the acoustic signal:

❑Repeat the process.

Lighting:

❑Briefly press the a button to switch the light on and off.

❑The light can be switched on at any time, even though the fan is switched off.

❑Adjusting the brightness:

Hold down the a button until the desired brightness is obtained.

6