Thermador HGEW36FS Care And Cleaning, Stainless steel surfaces, Aluminum and plastic surfaces

CARE AND CLEANING

WARNING To avoid risk of fire and explosion do not use flammable liquids or solvents.

Always unplug or disconnect the appliance from the power supply before servicing.

IMPORTANT: Do not clean the hood with abrasive sponges or with cleaning agents which contain sand, soda, acid or chlorine!

❑Clean the hood with a hot soap solution or a mild window cleaner.

❑Do not scrape off dried-on dirt but wipe off with a damp cloth.

❑When cleaning the grease filters, remove grease deposits from accessible parts of the housing.

This prevents the risk of fire and ensures that the hood continues operating at maximum efficiency.

❑Note: Do not use alcohol (spirit) on plastic surfaces, as dull marks may appear.

Caution: Observe all instructions and cautions provided with cleaners.

IMPORTANT: Clean the operating buttons with a mild soapy solution and a soft, damp cloth only.

Do not use stainless-steel cleaner to clean the operating buttons.

Stainless steel surfaces:

❑Use a mild non-abrasive stainless steel cleaner.

❑Clean the surface in the same direction as it has been ground and polished.

❑We recommend the stainless steel cleaner Fantastik® or Formula 409® sprayed onto a paper towel.

Aluminum and plastic surfaces:

❑Do not use dry cloths.

❑Use a mild window cleaning agent.

❑Do not use aggressive, acidic or caustic cleaners.

Observe the warranty regulations in the enclosed service booklet.

8