Thermador SGCS456, SGC456 Cooktop Operation, Sealed Burners, Burner Caps, Burner Grates

Models: SGC456 SGCS456

1 16
Download 16 pages 47.98 Kb
Page 6
Image 6
COOKTOP OPERATION

COOKTOP OPERATION

The following pages explain how each feature on the gas cooktop works and how to get the best cooking results.

Follow these hints when cooking on the cooktop:

Use proper cookware. (See Page 7.)

Center the pan over the burner before turning the burner on.

Refer to the Cooking Chart on Page 8 for suggested flame settings.

Sealed Burners

Your new cooktop has sealed gas burners. There are no burner parts under the cooktop to clean, disassemble or adjust. Your cooktop has two different burner sizes, large and medium. Match the pan to the size burner.

Burner Caps

Porcelain

Enamel Burner Cap

Ports

Locator

Igniter

Sealed Burners Notch

Burner Base

The burner cap is porcelainized steel. On the under- side of the cap is one locator which must fit into the corresponding notch on the burner base. If the burner cap is not placed correctly, the burner may not light or the flame may not burn completely or correctly.

WARNING: Do not use the cooktop

!without all burner caps and all burner grates properly positioned.

Burner “ON” Light (Models SGCS304, SGCS365 & SGCS456 only)

The “ON” light is located to the right of the burner control knobs. When illuminated, it indicates that one or more burners are in use. It remains on until all burners are turned off.

Burner Grates

The position of each double grate is labelled on the underside edge of the grate as shown in the figure below.

Single

(36"

models

only)

Universal Side Center

(30" models only)

30" Models have two universal grates. Position the straight side in the center. They are interchangeable by rotating 180°.

36" Models have one side grate, one center grate and one single grate. Position the grates on the cooktop as illustrated above.

45" Models have two side grates and one center grate. The side grates can be placed on either side of the center grate and the center grate may be rotated 180°.

WARNING: All grates must be properly positioned on the cooktop whenever the ! cooktop is in use. Each of the four feet must be placed into the corresponding

dimples in the cooktop. See illustration on Page 8. Do not use a grate if the rubber feet are missing or damaged.

Burner Control Knobs

SGC models which do not feature ExtraLow® opera- tions have only standard burner controls and bezels. ExtraLow cooktops (SGCS models) have standard burner controls and bezels as well as 2 ExtraLow burner controls and bezels. (See Page 5.)

PAGE 4

Page 6
Image 6
Thermador SGCS456, SGC456 owner manual Cooktop Operation, Sealed Burners, Burner Caps, Burner Grates, Burner Control Knobs