BP7308 LORRAINE KF240 2/15/06 3:21 PM Page 17
!WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.
Trouble Shooting
TROUBLE | PROBABLE CAUSE |
| SUGGESTED REMEDY |
|
|
|
|
1. Fan will not | 1. Fuse or circuit breaker | 1. | Check main and branch |
start. | blown. |
| circuit fuses or circuit breakers. |
|
| ! | WARNING: Make sure |
|
|
| main power is turned off. |
| 2. Loose power line | 2. | Check line power connections |
| connections to the fan. |
| to fan. |
| 3. Fan/Light Wall Control is OFF. | 3. | Turn ON Fan/Light Wall Control. |
| 4. Code switches in remote | 4. | Check that both code switches |
| control receiver and Fan/Light |
| are set in the same positions. |
| Wall Control are not set in the |
|
|
| same position. |
|
|
|
|
|
|
2. Fan sounds | 1. Blades not attached to fan. | 1. | Attach blades to fan before |
noisy. |
|
| operating. |
| 2. Screws securing fan blade | 2. | Check to make sure the screws |
| flanges to motor are loose. |
| which attach the blade flanges |
|
|
| to the motor are tight. |
| 3. Screws holding blades to | 3. | Tighten screws securely. |
| flanges are loose. |
|
|
|
|
|
|
3. Fan wobbles | 1. Setscrews in motor coupling are | 1. | Raise decorative downrod cover |
excessively. | not tightened securely. |
| and coupling cover and tighten |
|
|
| setscrews securely. |
| 2. Setscrew in the hanger ball/ | 2. | Tighten the setscrew in the |
| downrod assembly is loose. |
| hanger ball/downrod assembly. |
| 3. Screws securing fan blade | 3. | Check to be sure screws which |
| flanges to motor are loose. |
| attach the fan blade flanges |
|
|
| to the motor are tight. |
| 4. Fan blade flanges not seated | 4. | Check to be sure that the |
| properly. |
| screws securing the fan |
|
|
| blade flanges seat firmly. |
| 5. Hanger bracket and/or ceiling | 5. | Tighten the hanger bracket |
| outlet box is not securely |
| screws to the outlet box, and/or |
| fastened. |
| secure outlet box. |
| 6. Fan blades out of balance. | 6. | Interchanging an adjacent (side |
|
|
| |
|
|
| redistribute the weight and result |
|
|
| in smoother operation. |
|
|
| Or use supplied balancing kit to |
|
|
| balance blades. |
|
|
|
|
17
