(S3PT-15)

OPERATION

5.1 Connecting the FLEX-ARM Tongue to the Tractor

1.Ensure the tractor is equipped with the correct PTO shaft and the drawbar is set at the correct length.

2.Using the parking jack, position the tongue clevis to the height of the tractor drawbar.

3.Board the tractor and start the engine. Back the tractor to the FLEX-ARM aligning the drawbar hitch hole with the FLEX-ARM tongue clevis. Turn off the tractor engine, place the tractor in park, and set the parking brake before dismounting.

DANGER! Always shut the Tractor completely down, place the transmission in park, and set the parking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches.

OPERATION

4.To attach the Flex Arm insert the hitch pin through the drawbar and tongue clevis. Once the pin is inserted, attach the snap ring pin through the hole on the hitch pin and snap in place.

5.Attach safety tow chain to flex arm and tractor. Fasten the large loop of the safety chain to the hitch, using the 1” bolt, washer, and nut. Attach the other end of the chain to tractor. Refer to your tractor operator’s manual for complete instructions to attach chain to tractor. Adjust length to allow only enough slack as is needed for turning. Lock hook on chain. Ensure chain rating is equal to, or greater than the gross weight of the towed equipment.

6.Lower the jack until the tongue is completely supported by the drawbar. Remove jack from the tongue and place on storage bracket of FLEX-ARM.

Safety Tow

Chain Connection

Safety Tow Chain

If the FLEX-ARM is towed on a public roadway, a safety chain with tensile strength equal to or greater than the gross weight of the FLEX-ARM & mower must be connected between the tractor and FLEX-ARM. This will help control the implement in the event the tongue becomes disconnected from the drawbar. After connecting both ends of the safety chain, drive the tractor to the right and left to check for proper chain length. Adjust length as necessary and allow only enough slack in the chain to make a maximum turn in both directions.

FLX15/10 04/06

Operation Section 4-12

© 2006 Alamo Group Inc.

Page 55 Page 57
Page 56
Image 56
Tiger FLX10, FLX15 manual Connecting the FLEX-ARM Tongue to the Tractor
Page 55 Page 57

FLX15, FLX10 specifications

Tiger FLX10 and FLX15 are advanced multi-functional devices that have been designed to cater to diverse industrial and commercial needs. These machines stand out in their respective sectors due to their superior features, cutting-edge technologies, and robust characteristics, making them suitable for various applications.

The Tiger FLX10 brings a host of features that enhance productivity and efficiency. At its core, it integrates a powerful multi-core processor that ensures high-speed performance, allowing users to handle complex tasks with ease. The device is equipped with an intuitive user interface, which simplifies navigation and allows for seamless operation. The FLX10 also boasts impressive multitasking capabilities, enabling users to run multiple applications simultaneously without any lag, thus streamlining workflows.

On the other hand, the FLX15 takes performance a notch higher with its enhanced processing power and memory capacity. It is tailored for more demanding applications, making it ideal for industries requiring high-level data processing and analytics. This model features advanced connectivity options, including Wi-Fi, Bluetooth, and USB ports, facilitating easy integration with other devices and systems. Additionally, the FLX15 supports robust security features, safeguarding sensitive data and ensuring compliance with industry standards.

Both models incorporate advanced technologies that improve functionality. For instance, they utilize state-of-the-art thermal management systems, ensuring optimal performance even in high-temperature environments. The machines are designed with energy efficiency in mind, reducing power consumption while maintaining high output levels, which is a significant consideration for environmentally conscious users.

In terms of durability, both the Tiger FLX10 and FLX15 are constructed using high-quality materials, making them resistant to wear and tear. Their rugged design ensures longevity, minimizing downtime and maintenance costs. Furthermore, these devices come equipped with comprehensive support and warranty options, providing users with peace of mind regarding their investment.

In summary, the Tiger FLX10 and FLX15 are exemplary devices that embody modern technological advancements in industrial applications. With their powerful performance, user-friendly interfaces, advanced connectivity, and robust durability, they stand out as reliable solutions in today’s fast-paced business environment. Both models are well-positioned to meet the evolving demands of various sectors, making them valuable assets for companies looking to enhance their operational efficiency.
Top Page Image Contents