Tiger FLX10, FLX15 manual Uneven surfaces. STI-1

Models: FLX15 FLX10

1 100
Download 100 pages 41.23 Kb
Page 84
Image 84
(STI-7)
(STI-6)
(STI-2)

OPERATION

OPERATION

Reduce speed before turning or applying the brakes. Ensure that both brake pedals are locked together when operating on public roads.

DANGER! When the Wings are folded for transport, the center of gravity is raised and the possibility of overturn is increased. Drive slowly and use extremecaution when turning on hillsides. Overturning the Implement could cause the Implement to overturn the Tractor and vice versa resulting in serious injury or even death. Never fold wings on a hillside...the Implement may overturn.

In the transport position the flex arm offsets the mower as much as 3’ to the right. Do not allow the trailing mower wheels to run off the edge of the road or shoulder. Sudden turns or running off the road can cause loss of stability and possible mower and tractor roll over resulting in serious bodily injury or even death.

DANGER!

Be particularly careful when transporting the Implement using the tractor.

 

Turn curves or go up or down hills only at a low speed and at a gradual

 

steering angle. Make certain that at least 20% of the tractor’s weight is

 

on the front wheels to maintain safe steerage. Slow down on rough or

 

uneven surfaces. (STI-1)

WARNING!

WARNING!

Only tow the Implement behind a properly sized and equipped Tractor which exceeds the weight of the Implement by at least 20%. DO NOT tow the Implement behind a truck or other type of vehicle. Never tow the Implement and another Implement connected in tandem. Never tow the Implement at speeds over 20 MPH.

Secure the Implement for transport before traveling on public roads. For pull-type Implements, secure the center axle using cylinder stops or transport pin and properly attach a safety chain between the Implement and Tractor. Secure wings in upright position on folding Implements using wing transport locks.

When transporting the implements reduce speed when going around corners. Do not make any sudden turns at a high transport speed. The tractors and implements are much longer so turning speed needs to be at a low speed, and more clearance need to be taken in account for when turning.

FLX15/10 04/06

Operation Section 4-40

© 2006 Alamo Group Inc.

Page 84
Image 84
Tiger FLX10, FLX15 manual Uneven surfaces. STI-1