(SG-25)

OPERATION

OPERATION

Properly preparing and storing the flex arm & mower at the end of the season is critical to maintaining its appearance and to help ensure years of dependable service. The following are suggested storage procedures:

1.Thoroughly clean all debris off the flex arm & mower to prevent damage from rotting grass and standing water.

2.Lubricate all flex arm & mower grease points and fill gearbox oil levels as detailed in the maintenance section.

3.Tighten all bolts and pins to the recommended torque.

4.Check the flex arm & mower for worn and damaged parts. Perform repairs and make replacements immediately so that the flex arm & mower will be ready for use at the start of the next season.

5.Store the flex arm & mower in a clean, dry place with the flex arm frame & mower housing resting securely on blocks or at ground level.

6.Keep the drivelines yokes from sitting in water, dirt and other contaminants.

7.Use spray touch-up enamel where necessary to prevent rust and maintain the appearance of the flex arm & mower.

DANGER!

Never allow children to play on or around the Tractor and Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause the Implement to shift or fall crushing themselves and others.

It is critical that driveline clutches slip when an obstacle or heavy load is encountered to avoid flex arm ,mower, and tractor damage. If the flex arm & mower sit outside for an extended period of time or are exposed to rain and/or humid air, the clutch lining plates must be inspected to ensure they are not frozen together from rust or corrosion. If the flex arm & mower have been exposed to such conditions, at the start of each mowing season, and any time it is suspected that the slip clutch plates may be frozen together, readjust the slip clutch as explained in the maintenance section of the rotary cutter manual.

13. TRANSPORTING THE TRACTOR, FLEX-ARM, AND MOWER

Inherent dangers of operating the tractor,flex arm, and mower and the possibility of accidents are not left behind when you finish mowing an area. Therefore, the operator must employ good judgement and safe operation practices when transporting the tractor, flex arm, and mower between locations. By using good judgement and following safe transport procedures, the possibility of accidents while moving between locations can be substantially minimized.

DANGER!

Never allow children or other persons to ride on the Tractor or

Implement. Falling off can result in serious injury or death.

(SG-10)

FLX15/10 04/06

Operation Section 4-36

 

 

© 2006 Alamo Group Inc.

 

Page 79 Page 81
Page 80
Image 80
Tiger FLX10, FLX15 manual Transporting the TRACTOR, FLEX-ARM, and Mower
Page 79 Page 81

FLX15, FLX10 specifications

Tiger FLX10 and FLX15 are advanced multi-functional devices that have been designed to cater to diverse industrial and commercial needs. These machines stand out in their respective sectors due to their superior features, cutting-edge technologies, and robust characteristics, making them suitable for various applications.

The Tiger FLX10 brings a host of features that enhance productivity and efficiency. At its core, it integrates a powerful multi-core processor that ensures high-speed performance, allowing users to handle complex tasks with ease. The device is equipped with an intuitive user interface, which simplifies navigation and allows for seamless operation. The FLX10 also boasts impressive multitasking capabilities, enabling users to run multiple applications simultaneously without any lag, thus streamlining workflows.

On the other hand, the FLX15 takes performance a notch higher with its enhanced processing power and memory capacity. It is tailored for more demanding applications, making it ideal for industries requiring high-level data processing and analytics. This model features advanced connectivity options, including Wi-Fi, Bluetooth, and USB ports, facilitating easy integration with other devices and systems. Additionally, the FLX15 supports robust security features, safeguarding sensitive data and ensuring compliance with industry standards.

Both models incorporate advanced technologies that improve functionality. For instance, they utilize state-of-the-art thermal management systems, ensuring optimal performance even in high-temperature environments. The machines are designed with energy efficiency in mind, reducing power consumption while maintaining high output levels, which is a significant consideration for environmentally conscious users.

In terms of durability, both the Tiger FLX10 and FLX15 are constructed using high-quality materials, making them resistant to wear and tear. Their rugged design ensures longevity, minimizing downtime and maintenance costs. Furthermore, these devices come equipped with comprehensive support and warranty options, providing users with peace of mind regarding their investment.

In summary, the Tiger FLX10 and FLX15 are exemplary devices that embody modern technological advancements in industrial applications. With their powerful performance, user-friendly interfaces, advanced connectivity, and robust durability, they stand out as reliable solutions in today’s fast-paced business environment. Both models are well-positioned to meet the evolving demands of various sectors, making them valuable assets for companies looking to enhance their operational efficiency.
Top Page Image Contents