(SGM-11)

OPERATION

10.5 Operating the Flex Arm & Mower

When ready for field use, stop the cutter and pull the transport pins on the cylinder guard and the rotary cutter. Lower the wings and cutter before entering the ditch. Drive the tractor forward along the side of the road and extend the flex arm cylinder to ease the cutter into the ditch. Engage the PTO. Only operate the Flex-Arm and mower from the tractor operator’s seat with the seatbelt securely fastened. The tractor must be equipped with a ROPS in the raised position or a ROPS cab.

Before engaging the PTO the operator needs to make sure that the blades are rotating in the correct direction. If they are not they need to contact there local dealer or Schulte to correct the problem. Refer to your operators manual for proper blade rotation.

IMPORTANT: The operator should never operate the mower with the Flex Arm if the blades do not have the proper blade rotation. Serious injury or even death may occur if cutter is operated.

The mower is designed to cut vegetation up to 2” in diameter. Sharp blades will produce a cleaner cut and require less power. Travel at a speed that allows the mower sufficient time to cut through the vegetation and maintain the PTO operating speed to prevent overloading the Flex-Arm, mower, and tractor. When cutting on ditches use the cylinder to avoid most obstacles. The tractor may be needed to maneuver around larger obstacles.The FLX15 can swing the cutter 87” using the cylinder. The FLX10 gives 75”. Choose a driving pattern that provides the maximum pass length and minimizes turning.

IMPORTANT: Do not operate the PTO with the flex arm in the transport position for extended periods of time. This may cause driveline vibration and will accelerate universal joint wear.

Under certain conditions, tractor tires may roll some grasses down preventing them from being cut at the same height as the surrounding area. However a better cut is possible with the Flex-Arm. There is only a single caster wheel in front of the cutter and it is ideally located to maximize quality of cut. Lower cutting heights in general will also increase cutting performance.

Avoid mowing in the reverse direction when possible. In situations where the mower must be backed to access areas to be cut, make sure there are no persons or other foreign debris behind the mower before mowing in reverse. The Flex-Arm attaches to the mower by means of a strut that does not allow the mower to pivot in relation to the arm. Which allows the mower to be easily backed up. However when mowing in reverse, operate the tractor, Flex-Arm, and mower at a reduced ground speed to ensure tractor, Flex-Arm, and mower control is maintained.

WARNING!

Do not mow with two machines in the same area except with Cab tractors with the windows closed.

FLX15/10 04/06

Operation Section 4-31

© 2006 Alamo Group Inc.

OPERATION

Page 75
Image 75
Tiger FLX15, FLX10 manual Operating the Flex Arm & Mower

FLX15, FLX10 specifications

Tiger FLX10 and FLX15 are advanced multi-functional devices that have been designed to cater to diverse industrial and commercial needs. These machines stand out in their respective sectors due to their superior features, cutting-edge technologies, and robust characteristics, making them suitable for various applications.

The Tiger FLX10 brings a host of features that enhance productivity and efficiency. At its core, it integrates a powerful multi-core processor that ensures high-speed performance, allowing users to handle complex tasks with ease. The device is equipped with an intuitive user interface, which simplifies navigation and allows for seamless operation. The FLX10 also boasts impressive multitasking capabilities, enabling users to run multiple applications simultaneously without any lag, thus streamlining workflows.

On the other hand, the FLX15 takes performance a notch higher with its enhanced processing power and memory capacity. It is tailored for more demanding applications, making it ideal for industries requiring high-level data processing and analytics. This model features advanced connectivity options, including Wi-Fi, Bluetooth, and USB ports, facilitating easy integration with other devices and systems. Additionally, the FLX15 supports robust security features, safeguarding sensitive data and ensuring compliance with industry standards.

Both models incorporate advanced technologies that improve functionality. For instance, they utilize state-of-the-art thermal management systems, ensuring optimal performance even in high-temperature environments. The machines are designed with energy efficiency in mind, reducing power consumption while maintaining high output levels, which is a significant consideration for environmentally conscious users.

In terms of durability, both the Tiger FLX10 and FLX15 are constructed using high-quality materials, making them resistant to wear and tear. Their rugged design ensures longevity, minimizing downtime and maintenance costs. Furthermore, these devices come equipped with comprehensive support and warranty options, providing users with peace of mind regarding their investment.

In summary, the Tiger FLX10 and FLX15 are exemplary devices that embody modern technological advancements in industrial applications. With their powerful performance, user-friendly interfaces, advanced connectivity, and robust durability, they stand out as reliable solutions in today’s fast-paced business environment. Both models are well-positioned to meet the evolving demands of various sectors, making them valuable assets for companies looking to enhance their operational efficiency.