Temperature
The temperature sensor is always on and will take a
reading at least once every 60 seconds. The temperature is indicated by the lower hand and accompanying scale.
When worn on wrist, temperature reading is affected by body heat. For more accurate readings, remove watch from wrist.
Depth Sensor On/Off
The sensor is normally off, and must be turned on
manually prior to submersion. Push and release button B to turn the sensor on. The 4th center hand will move from the OFF (6 o’clock) position to the 12 o’clock position and begin to take readings at least once every 5 seconds. As the depth increases, the 4th center hand will point to the actual depth as indicated on the depth scale. If the readings remain in the range of 0 to 2 meters
for 5 minutes, the sensor will automatically turn off. To turn the sensor off manually, press and hold button B for 2 seconds. The 4th center hand will move to the OFF (6 o’clock) position.
Recall Maximum Depth/Minimum Temperature After coming to the surface, unscrew the crown and pull to the middle position. The center and lower hands will move to display the maximum depth value and the mini- mum temperature value, respectively, recorded during the most recent descent. When the depth sensor is activated again, the memory will be cleared.
If the watch has not yet been used, then the center and lower hands shall move to display 0 meters/feet and 0ºC/32 ºF, respectively. The crown must be screwed back in prior to use/submersion.
70 | 71 |
