TOA Electronics 595U quick start Installing the Software on a Mac

Installation Overview

The installation process on a Mac computer has three stages:

“Installing the Software on a Mac” — Install the Watcher Lite software (see page 25).

“Installing the Drivers” — Run the Watcher Lite software, insert the battery into the USB modem, and insert the USB modem (see page 28).

“Activating Your USB Modem” — After charging your modem, activate your account and configure the Sprint Mobile Broadband USB modem to use your account (see page 30).

Installing the Software on a Mac

Caution:	Do not insert the USB modem until you have installed the
	Watcher Lite software.
Note:	As part of the installation process you will be prompted to restart your
	computer; save any open documents.

To install the Watcher Lite software on your Mac computer:

1.If your USB modem has not yet been activated, ensure you are in the network coverage area (not roaming).

2.Insert the Sprint Mobile Broadband USB modem installation CD into your CD-ROM drive.

3.On the Mac desktop, double-click the Watcher Lite CD icon:

4.In the WL... Finder window, double-click INSTALLER.dmg.

5.In the Sierra Wireless Watcher Lite Finder window, double-click SierraWirelessWatcherLiteInstall.mpkg.

Installing the Software (Mac)

25