TOA Electronics C-CV24-2 NTSC General Description, Handling Precautions, Modifications

NTSC version complies with Part 15 of the FCC Rules.

Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Modifications

Any modifications made to this device that are not approved by TOA Corporation may void the authority granted to the user by the FCC to operate this equipment.

Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the security aspects of this product. UL has only tested for fire, shock or casualties as outlined in UL's Standard(s) for Safety. UL Certification does not cover the performance or reliability of the security hardware and security operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY RELATED FUNCTIONS OF THIS PRODUCT.

2. GENERAL DESCRIPTION

The C-CV24-2 Color Dome Camera is an indoor-use camera and is equipped with a high-resolution camera and lens. It is designed to operate on 24 V AC or 12 V DC, which are supplied by an external power supply unit. Since its 2X vari-focal, auto-iris lens is built inside the camera, its angle of view can be manually adjusted.

3. HANDLING PRECAUTIONS

•Do not point the camera toward the sun or other strong lighting or reflected light.

•Avoid jarring or striking the camera, as the camera may fail.

•Install the camera in locations where the temperature range does not exceed –10°C to +50°C, and no dew condensation is formed.

•To clean, wipe with a soft, dry cloth. Never use benzene, thinner or chemically-treated towel to avoid damage to the camera’s finish.

•To clean the lens, use a camera blower or lightly wipe with lens cleaning paper.

•Picture quality may suffer if camera cables are wired close to other electrical equipment, such as fluorescent lamps. In such cases, reroute the wiring.

•Monitor screen pictures may become distorted or roll if the camera is used in locations influenced by strong electrical or magnetic fields from television transmission antennas, motors or transformers. In such cases, install the cables inside sheet steel cable conduit.

•Do not install the camera in locations where solvents or chemicals are used, as exposure to such chemicals could damage the dome cover finish.

•Use the external power supply unit of the following rating when the camera is operated on 12 V DC.

12 V DC, over 1.0 A

3