mark and then rotating the cover clockwise.
(Be sure that the dome cover’s alignment mark is properly aligned with the camera’s alignment mark.)
mark
Alignment mark
About the alignment marks
Alignment mark
The dome cover has two alignment marks. Note that the mark to be aligned with the camera’s 
mark differs depending on whether the camera is being mounted on a wall or ceiling.
Dome cover external view (as supplied from the factory)
Camera window
Front alignment mark
Rear alignment mark |
|
• Ceiling mounting : Align the front alignment mark with the camera’s | mark. |
• Wall mounting : Align the rear alignment mark with the camera’s | mark. |
6. CONNECTIONS
Note: If the Video output is not terminated at 75 Ω , video pictures are not properly displayed. Make sure that the output has been terminated at 75 Ω at the connected monitor or switcher.
+ | 1 |
DC12V IN | AC24V IN |
- | 2 |
Monitor
: BNC plug
Video input
Video output
24 V AC or 12 V DC
Use the external power supply unit of the following rating when the camera is operated on 12 V DC.
12 V DC, over 1.0 A
8
