7. ADJUSTMENT

1.Switch on the camera power after completing camera connections. Power is supplied to the camera.

2.Normally,set the Shutter Speed switch to "1/60"(NTSC) or "1/50"(PAL) position.

Flickering of the picture may interfere with the view under fluorescent lamp in the area with power frequency of 50 Hz(NTSC) or 1/60(PAL). In such cases, set the switch to "1/100"(NTSC) or "1/120"(PAL) position, and the image free from flickering can be obtained.

Note

If the Shutter Speed switch of the Mode Setting switch is set to the ON position, sensitivity is reduced compared to operation in the OFF position. When using the camera in a dark location, or where light flicker is not an annoyance, set the switch to the OFF position.

3.Connect the monitor to the Monitor Output terminal to permit a picture to be viewed on the monitor.

4.Adjust the camera angle.

Camera angle can be adjusted for up to 130º(± 65º) for horizontal rotation, for up to 140º(± 70º) for vertical rotation, and for up to 180º(± 90º) for picture tilting.

Horizontal rotation ± 65º

 

Vertical rotation ± 70º

Zoom ring fixing screw

 

 

Zoom ring

Focus ring fixing screw

Focus ring

Vari-focal lens

Picture tilting ± 90º

 

5.Adjust the angle of view with the Zoom ring and adjust the focus with the Focus ring for the best possible picture reproduction. After lens adjustment completion, tighten both the Zoom ring fixing screw and the Focus ring fixing screw.

Notes

Since the Iris control is factory-preset to an optimum position for general use, avoid tampering with it in normal conditions. Turning the control unnecessarily could cause reduced picture quality or equipment failure. When the Iris control needs to be readjusted to match a specific subject, first set both the Adjustment switch and the Backlight Correction switch of the Mode setting switch to the OFF position, then adjust the control to an optimum level. After adjustment, place a hand over the lens for several seconds and then release to check the lens for correct iris operation.

If the focus is adjusted for a subject under good lighting conditions, the subject may go out of focus when conditions become dark. To avoid this, adjust the lens focus after setting the Adjustment switch of the Mode setting switch to the ON position. Be sure to switch it back to the OFF position after completing lens adjustment.

6. Attach the dome cover to the camera after completing all necessary adjustments.

9

Page 9
Image 9
TOA Electronics C-CV24-2 NTSC instruction manual Adjustment

C-CV24-2 NTSC specifications

The TOA Electronics C-CV24-2 NTSC is an advanced CCTV camera renowned for its exceptional performance in various surveillance applications. This model is particularly well-regarded in environments requiring high-resolution imaging and reliable operation, making it a popular choice among security professionals and system integrators.

One of the main features of the C-CV24-2 NTSC is its high-resolution imaging capability, which delivers clear and detailed video outputs. With a resolution of 480 TV lines, this camera is equipped to capture crisp images that ensure effective monitoring. The NTSC format provides compatibility with a wide range of analog video systems, making integration seamless for users looking to enhance their current surveillance setup.

The C-CV24-2 NTSC employs advanced technologies for improved image quality and performance. It is equipped with a high-performance CCD sensor, which plays a crucial role in producing clear images, even in low-light conditions. The camera utilizes a built-in infrared cut filter, which helps maintain accurate color reproduction during the daytime while enhancing low-light sensitivity at night. This adaptability ensures that users can rely on the camera for 24/7 surveillance.

Another noteworthy characteristic of the TOA C-CV24-2 NTSC is its robust construction. Designed for durability, the camera is housed in a weather-resistant enclosure, making it suitable for both indoor and outdoor applications. The design is optimized to withstand varying environmental conditions, ensuring longevity and consistent performance.

Users will also appreciate the camera's flexibility in installation. The compact design allows for versatile mounting options, making it easy to position for maximum coverage. Furthermore, the camera supports multiple lens configurations, allowing users to customize the field of view and meet specific surveillance needs.

In terms of connectivity, the C-CV24-2 NTSC is designed with ease of integration in mind. It features standard video output connections, which enable straightforward integration with existing CCTV systems. The camera’s user-friendly interface simplifies setup and operation, making it accessible even to those with minimal technical experience.

Overall, the TOA Electronics C-CV24-2 NTSC stands out as a reliable and high-quality surveillance solution. With its impressive imaging capabilities, durability, and flexible installation options, it is an excellent choice for anyone looking to enhance their security infrastructure.