Toastmaster MFC-240C a b, a b, a

Troubleshooting and Routine Maintenance
97
Transferring your fa xes or Fax
Journal report B
If the LCD shows:
Change Unable XX, Clean Unable XX,
Init. Unable XX, Print Unable XX or
Scan Unable XX
we recommend transferring your faxes to
another fax machine. (See Transferring faxes
to another fax machine as detailed below.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine as detailed in this
page.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine B
If you have not set up your Station ID (s ee
Quick Setup Guide page 12), you cannot
enter fax transfer mode.
aPress Menu, 9, 0, 1.
bDo one of the following:
If the LCD shows No Data, there are
no faxes left in the machine's
memory.
Press Stop/Exit.
If the LCD shows Enter Fax No.,
enter the fax number to which faxes
will be forwarded.
cPress Mono Start.
Transferring Fax Journal report to
another fax machine B
If you have not set up your Station ID, you
cannot enter fax transfer mode.
aPress Menu 9, 0, 2.
bEnter the fax number to which Fax
Journal report will be forwarded.
cPress Mono Start.
Changing LCD language B
You can change the LCD language.
aPress Menu, 0, 0.
0.Initial Setup
0.Local Language
bPress a or b to select your language.
Press OK.
cPress Stop/Exit.