24
5
Entering Fax mode 5
To enter fax mode, press (Fax), and
the key will glow green.
Faxing from the ADF 5
aMake sure you are in Fax mode .
bPut the document face down in the ADF.
cDial the fax number using the dial pad.
dPress Mono Start or Colour Start.
The machine starts scanning the
document.
Note
To cancel, press Stop/Exit.
If the memory is full, the document will be
sent in real time.
Faxing from the scan ner
glass 5
You can use the scanner glass to fax pages
of a book one at a time. The docu ments can
be up to letter or A4 size.
You cannot send multiple pages for colour
faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
aMake sure you are in Fax mode .
bLoad your document on the scanner
glass.
cDial the fax number.
dPress Mono Start or Colour Start.
If you press Mono Start, the
machine starts scanning the first
page. Go to step e.
If you press Colour Start, the
machine starts sending the
document.
eDo one of the following:
To send a single page, press 2 to
choose No. (or press Mono Start
again).
The machine starts sending the
document.
To send more than one page, press
1 to choose Yes and go to step f.
fPut the next page on the scanner glass.
Press OK.
The machine starts scanning the page.
(Repeat step e and step f for each
additional page.)
Note
If the memory is full and you are faxing a
single page, it will be sent in real time.
Sending a fax 5