Top Innovations MODEL MC1860 warranty Proper Storage, Removing Mineral BUILD-UP

CARE AND STORAGE GUIDELINES

PROPER STORAGE

Preparing your Steam Vacuum for storage is quick and simple. When you have finished your cleaning tasks, follow the steps listed below.

1.Set Steam-Vac Switch and Main Control Switch to “Off” position and unplug power cord from electrical outlet.

2.Allow unit to cool for at least 30 minutes.

3.Remove all attachments from unit.

4.Remove and empty Water Filtration Chamber, then replace.

5.Drain any remaining water in water reservoir into a sink or tub to prevent over-filling during your next use.

6.Store attachments safely away, preferably near Steam Vacuum.

7.Store Steam Vacuum in a cool, dry location.

REMOVING MINERAL BUILD-UP

One common problem with steam appliances is mineral build-up caused by high mineral content in many municipal water supplies. The best way to avoid this is to use de- mineralized or distilled water in unit. If you are unable to use de-mineralized or distilled water, we recommend you use this procedure monthly to help avoid mineral build-up:

1.Switch Steam-Vac Switch and Main Control Switch to “Off” position and unplug power cord from electrical outlet. Allow unit to cool for at least 30 minutes.

2.Remove all attachments from unit.

3.Remove Water Reservoir Cap.

4.Drain water reservoir into sink or tub.

5.Using Measuring Cup, make a mixture of 5 oz. vinegar and 5 oz. water.

6.Slowly pour water-vinegar solution into water reservoir, using Water Funnel to prevent spilling water.

7.Allow to stand for 40 minutes.

8.Drain water-vinegar solution from water reservoir.

9.Rinse water reservoir with fresh water and drain until vinegar odor dissipates.

10.Replace Water Reservoir Cap.

REMOVING/REPLACING AIR FILTER

The MC1860 Steam Vacuum incorporates an air filter, in addition to the water filtration sys- tem. This air filter purifies the air that is released by the unit during vacuuming, helping to make the air in your home cleaner and safer to breath. After several uses, we recommend removing and cleaning this filter to keep it functioning optimally. Also, we recommend replacing the filter with a new one after approximately 6 months of regular use.

To remove the air filter, grasp the small tab on the bottom of the filter faceplate, pull outward, and the faceplate will release. You can now clean the filter on the back side of the faceplate, as well as the sponge filter inside of air filtration outlet. Rinse with warm water, and allow to air-dry completely before placing back into unit.

For information on obtaining replacement air filters, refer to page 14 of this manual.

12 Top Innovations, Inc.

STEAM VACUUM PRODUCT INFORMATION

The following features and accessories are included with your Steam Vacuum. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 14 of this manual.

	UNIT FEATURES & ACCESSORIES
	1.		Water Filtration Chamber
	2.	Steam-Vac Switch
	3.		Water Reservoir Cap
	4.		Main Control Switch
	5.		Carry Handle
	6.		Steam Ready Indicator
	7.		Hose
	8.		Handle
	9.		Steam Trigger
	10.		Steam Nozzle
	11. Vacuum Nozzle
	12.		Hose Connection Base
	13.		Air Filter
	14.		Vacuum Head
	15.		Squeegee Insert
	16.		Brush Insert
	17.		Heavy Carpet Insert
	18.		Squeegee Head
	19.		Steam Jet Nozzle
	20.		Small Vacuum Head
	21.		Extension Wands
	22.		Nylon Utility Brush
	23.		Water Funnel
	24.		Measuring Cup
Top Innovations, Inc.				5