If the OGM is less than 3 seconds, the recording is not valid.
To stop the recording. The message will be playbacked
To replay the recorded OGM
14.4To delete an OGM
Select OGM1 or OGM2.
To replay the recorded OGM
Press the delete button during
playback. The
14.5TAD Setting
14.5.1 Selecting OGM1 or OGM2
In of the TAD setting menu, you can also select the outgoing message.
Enter the menu
Select ‘TAD Setting’
Enter the submenu
Select ‘Answering’
To confirm
Select
Confirm
ESC 2 X To leave the menu
14.5.2 Select the number of rings
To select the number of rings before the TAD an- wswers the call:
Enter the menu
Select ‘TAD Setting’
Enter the submenu
Select ‘TAD Rings’
To confirm
Select 2 to 9 or select T/S
Confirm
ESC 2 X To leave the menu
Topcom Fidelity 1150
T/S is ‘Toll Saver’. The TAD will answer a call after 4 rings if there are no new messages, and after 2 rings if there are new messages. If there are no new messages and you call your machine to check your messages remotely, you can hang up after the 2nd ring. You do not need to pay connection fees and you know that you do not have any new messages.
14.5.3 Setting the remote PIN code
This code is necessary for remote operation (see chapter 14.11)
Enter the menu
Select ‘TAD Setting’
Enter the submenu
Select ‘TAD Pin’
To confirm
Enter the new PIN code (3 numbers)
Confirm
ESC 2 X To leave the menu
14.5.4 Call Screen Mode
When there is an incomming call you can listen to the recording without picking up the handset.You can enable or disable this function.
Enter the menu
Select ‘TAD Setting’
Enter the submenu
Select ‘Call Screen’
To confirm
Select ‘Call Screen - On’ or ‘Call
Screen - Off’
Confirm
ESC 2 X To leave the menu
ENGLISH
Topcom Fidelity 1150 | 9 |
