Topcom 1210C, 1200C manual Making Calls 4.4.1 External Call, Number preparation

HANDL. B1200C/1210C 30-03-2001 08:32 Page 51

Butler 1200C/1210C

•Press the Programming key .

•‘PIN’ appears on the display.

•Enter the 4-digit PIN code of the base unit (default PIN code is ‘1590’). Use the number keypad.

•Press the Programming key .

•The handset is subscribed to the base unit.

4.4Making Calls 4.4.1 External Call

• Press the Line key .

• The Line/Charge indicator (LED) on the base unit will blink. ‘EXT’ and the Call symbol appear on the display.

• You will hear the dial tone. Dial the telephone number you wish to call.

• The number appears on the display and is dialled.

• After finishing your call, press the Line key to hang up or put the handset back on the base unit.

4.4.2 Number preparation

• Dial the telephone number you wish to call. You can correct the number by pressing the Delete/Mute key .

• Press the Line key .

• The Line/Charge indicator (LED) on the base unit will blink. ‘EXT’ and the Call symbol appear on the display.

• The telephone number is dialled automatically.

• After finishing your call, press the Line key to hang up or put the handset back on the base unit.

4.4.3Redialling the last number dialled

• Press the Line key .

• The Line/Charge indicator (LED) on the base unit will blink. ‘EXT’ and the Call symbol appear on the display.

• You will hear the dial tone.

• Press the Redial key . The number you last called is dialled automatically without having to re-enter the number.

4.4.4Redial one of the last 5 numbers dialled

•Press the Redial key . The number you last called appears on the display. If you would like

to dial one of the last 5 numbers dialled, press the Redial key a few times until the desired number appears on the display.

•Press the Line key .

•The number shown on the display is dialled automatically without you having to re-enter the number.

•After finishing your call, press the Line key to hang up or put the handset back on the base unit.

ENGLISH

51