HANDL. B1200C/1210C
Butler 1200C/1210C
•The current status of the keypad appears on the display:
-‘LOCK’: the keypad is locked
-‘UNLOCK’: the keypad is not locked
•Press the Up or Down key 
to make your selection.
•Press the Programming key 
to confirm your selection.
4.20 Turning key click on/off
You can set the telephone to make a sound whenever you press a key.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘KEY SETUP’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘KEY CLICK’ appears on the display.
•Press the Programming key 
.
•The current status appears on the display:
-‘CLICK ON’: turn on key click
-‘CLICK OFF’: turn off key click
•Press the Up or Down key 
to make your selection.
•Press the Programming key 
to confirm your selection.
4.21 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4) , you must select a base unit because the handset can only communicate with one base unit at a time. There are two possibilities:
4.21.1 Automatic selection
If you set the handset to ‘automatic selection’, the handset will automatically choose the closest base unit in standby.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘BASE SEL’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘AUTO’ appears on the display.
•Press the Programming key 
.
•‘SEARCHING’ and the symbol 
appear on the display.
•A signal sounds once the handset has found a base unit.
4.21.2 Manual selection
If you set the handset to ‘manual selection’, the handset will only choose the base unit you have set.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘BASE SEL’ appears on the display.
ENGLISH
59
