HANDL. B2455_euro.qxd 27/2/03 9:01 pm Page 22
Butler 2455
•Press the Up or Down key 
repeatedly until ‘REMOVE HS’ appears on the display.
•Press the Programming key 
.
•‘PIN’ appears on the display.
•Enter your
•Press the Programming key 
.
•‘REMOVE HS’ appears on the display.
•Dial the number of the handset you want to remove (1
•Press the Programming key 
.
•‘REMOVE HS’ appears on the display and the handset is removed
•NOT SUB’ appears on the handset removed.
4.28 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4) , you must select a base unit because the handset can only communicate with one base unit at a time. There are two possibilities:
4.28.1 Automatic selection
If you set the handset to ‘automatic selection’, the handset will automatically choose the closest base unit in standby.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘BASE SEL’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘AUTO’ appears on the display.
•Press the Programming key 
.
•‘SEARCHING’ and the symbol 
appear on the display.
•A signal sounds once the handset has found a base unit.
4.28.2 Manual selection
If you set the handset to ‘manual selection’, the handset will only choose the base unit you have set.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘BASE SEL’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘MANUAL’ appears on the display.
•Press the Programming key 
.
•‘BASE
•Enter the number of the base unit you want to select
•Press the Programming key 
.
•‘SEARCHING’ and the symbol 
appear on the display.
•A signal sounds once the selected base unit has been found.
22
