Topcom 2500 manual do utilizador Using the Baby Viewer

Topcom Baby Viewer 2500

Once the Baby unit and Parent Unit have been switched on, the display of the parent unit must show the captured video from the Baby unit.

5Using the Baby Viewer 2500

5.1 Fine tuning

• Place the camera in a convenient location, point the lens of the camera to the observation area.

•Adjust the angle by rotation the baby unit.

Do not place the camera within the babies reach!

5.2 Fixing the camera

• Use the crib connector to fix the baby unit to the crib. (See illustration)

5.3 Night Light

• Press the Night Light button (19). The night light (18) will illuminate.

5.4 Night vision

The camera has 9 high-intensity LED’s for picking up clear images in the dark. When the build in photo sensor measures the ambient light level as low, the LED’s will automatically activate.

5.5Setting the Parent - Unit display brightness

•Press the Brighthess Low button (16) to make the display darker.

•Press the Brightness High button (17) to make the display brighter.

5.6VOX function

•Press the VOX-button (8) on the side of the monitor. This will turn off the display, but the VOX indicator (2) will turn on.

In VOX mode, the display will turn on when it is activated by the babies voice or other sound around the baby unit. It will turn off again after 30 seconds.

•Press the VOX-button (8) again to turn off VOX - mode. The LCD will be on continously.

5.7Melody function

You can remotely activate a melody broadcasted on the baby-unit.

•Press the Melody start/stop button (10) to active the melody.

•Press the Melody select button (9) to switch between 3 different melodies.

•Press the Melody start/stop button (10) to deactive the melody.

6 Topcom Baby Viewer 2500