Pause key, Locating a misplaced handset paging

Topcom Butler 4011/4011C Sim

•When you want to resume the conversation, press the Delete/Mute key again.

•The symbol ‘X’ disappears from the display (). The person on the other end of the line can hear you again.

4.10 Pause key

If you dial a telephone number and you would like to add a pause to this number, press the Pause key at the desired place in the number.

When you call this number, this pause (3 seconds) is automatically included.

4.11 Conference call (two internal DECT handsets and one external caller)

You can have a telephone conversation with one internal and one external caller at the same time.

• While on the line with an external caller, press the INT key twice.

•The external call is now on hold.

•‘INT‘ appears on the display.

•Dial the number of the handset you would like to include in the call.

•Once the handset dialled is answered, keep the ‘#’ key pressed for 3 seconds.

•‘CONFERENCE’ appears on the display.

•Now you are connected to one external and one internal caller (conference call).

4.12 Locating a misplaced handset (paging)

If you cannot find the handset, briefly press the Paging key on the base unit.

All handsets subscribed with the base unit will sound a signal so you can locate the misplaced handset. To stop the signal, briefly press the Line key on any handset.

4.13 Using the alphanumeric handset keypad

Use the alphanumeric keypad to type text. To select a letter, press the corresponding key. E.g. if you press the alphanumeric key ’5’, the first character (j) appears on the display. Press it repeatedly to select other characters from this key.

Press the ‘2’ key twice to select the letter ‘B’. If you would like to select both ‘A’ and ‘B’ after each other, first press the ‘2’ key once to select ‘A’, wait 2 seconds until the cursor moves to the next position and then press the ‘2’ key twice to select ‘B’. You can delete characters mistakenly typed by using the Delete key . The character in front of the cursor will be deleted. You can move the cursor by pressing the Up and Down keys .