Topcom Butler 4011/4011C Sim

4.23 Subscribing a handset to a B24xx, 28xx, 29xx, 32xx, 40xx, 46xx

In order to be able to make and receive telephone calls, a new handset has to be subscribed to the base unit. You can subscribe 5 handsets to one base unit. By default, each handset is subscribed as handset 1 on the base unit upon delivery (base unit 1).

!!! You only need to subscribe the handset if:

the handset subscription has been removed from the base unit (e.g. for reinitialisation)

you want to subscribe a different handset to this base unit.

The underlined procedure is only applicable to a B40XX handset and base unit!!

Keep the Paging key on the base unit pressed for 10 seconds until The Line/Charge indicator on the base unit begins to blink rapidly. The Line/Charge indicator will blink rapidly for one minute. During this minute, the base unit is in subscribing mode and you must do the following to subscribe the handset:

Press the Programming key .

Press the Up or Down key repeatedly until ‘BASE SUB’ appears on the display.

Press the Programming key .

‘BASE _‘ appears on the display.

Enter a number of the base unit you would like to subscribe the handset to (1-4). Use the number keypad.

Each handset can be subscribed to 4 different DECT base units. Each base unit is assigned a number from 1 to 4 in the handset. When you subscribe a new handset, you can assign a base unit number. It is best to use ‘1’.

‘SEARCHING’ and the symbol appears on the display.

The RFPI code (each base unit has a unique RFPI code) appears on the display and a signal sounds when the handset has found the base unit.

Press the Programming key .

‘PIN’ appears on the display.

Enter the 4-digit PIN code of the base unit in (default PIN code is ‘0000’). Use the number keypad.

Press the Programming key .

The handset is subscribed to the base unit.

4.24 Subscribing Butler 4011 handset on another base (other brand/model)

Put the base in subscription mode (see manual of the base). If the base is in subscribing mode, you have to do the following to subscribe the handset:

Press the Programming key .

Press the Up or Down key repeatedly until ‘BASE SUB’ appears on the display.

Press the Programming key .

‘BASE _‘ appears on the display.

Enter a number for the base unit to which you would like to subscribe the handset (1-4).

Use the number keypad.

‘SEARCHING’ and the symbol appear on the display.

ENGLISH

Topcom Butler 4011/4011C Sim

23

Page 23
Image 23
Topcom 4011C SIM manual Subscribing a handset to a B24xx, 28xx, 29xx, 32xx, 40xx, You only need to subscribe the handset if