Topcom Butler 4011/4011C Sim

e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486 These handsets can no longer dial numbers beginning with ‘01486’.

Press the Programming key to confirm your selection. Repeat the same procedure described above if you would like to bar other numbers (max. 5)!

4.28 Direct Call

By setting a Direct Call number, the phone will automatically take the line and dial out this number. This function is useful to use the phone as a emergency phone.

4.28.1To program the Direct Call number

• Press the Programming key

• Press the Up or Down key until ‘DIRECT’ appears on the display

• Press the Programming key

• If necessary, delete the existing number by pressing the Delete-key a few times

• Enter the direct number

• Press the Programming key

4.28.2Turn the Direct Call function ON/OFF

To turn it ON:

Press the Programming key

Press the Up or Down key until ‘DIRECT’ appears on the display

Press the mute-key for 2s

‘DIRECT ON’ appears on the display

To turn if OFF:

Quick press the Programming key twice

4.29 Default settings (reset) of the parameters

You can reset the standard (default) settings in the telephone. You need the PIN code to do this.

The default settings are:

 

Keypad:

not locked

Key clicks:

active

Speaker volume:

level

Ringer melody:

1

Ringer volume :

5

Selection base unit:

automatic

Flash time:

100ms

To restore the default settings, do the following:

Press the Programming key .

Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

Press the Programming key .

Press the Up or Down key repeatedly until ‘RESET’ appears on the display.

Press the Programming key .

26

Topcom Butler 4011/4011C Sim

Page 26
Image 26
Topcom 4011 SIM, 4011C SIM manual Default settings reset of the parameters, To program the Direct Call number