Topcom Butler 4011/4011C Sim

‘PIN’ appears on the display.

Enter your PIN code.

Press the Programming key .

4.30 Complete reinitialisation of the telephone

This function allows you to completely reinitialise the telephone without requiring your PIN code. This will delete all Phone Book memory entries, all handsets will be removed, all default settings will be restored and the default PIN code will be restored to ‘0000’.

Do the following:

Disconnect the battery in the telephone.

Keep the ‘*’ key pressed and reconnect the battery until the handset rings continually and the display lights up. Release the ‘*’ button and press the Programming key .

The handset finds the base unit and a signal sounds.

Briefly press the ‘*’ key.

‘RESET ?‘ appears on the display.

Press the Programming key to confirm your selection of disconnect the battery to discontinue the procedure.

‘RESETTING‘ appears on the display and a long beep tone sounds.

‘NOT SUB‘ appears on the display. The handset is completely reinitialised.

Afterwards, you must resubscribe all handsets as described in point 4.23! However you no longer need to set the base unit to subscription mode, because this now happens automatically!

4.31 Setting the handset dialling mode

There are two types of dialling modes:

DTMF/Tone dialling (the most common)

Pulse dialling (for older installations)

To change the mode of numeration:

Press the Programming key

Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

Press the Programming key

Press the Up or Down key repeatedly until ‘DIAL MODE’ appears on the display.

Press the Programming key

Select ‘TONE’ or ‘PULSE’ by means of the UP and Down key

Press the Programming key to confirm

ENGLISH

Topcom Butler 4011/4011C Sim

27

Page 27
Image 27
Topcom 4011C SIM, 4011 SIM manual Complete reinitialisation of the telephone, Setting the handset dialling mode