Topcom Butler 4011/4011C Sim
•The RFPI code (each base unit has a unique RFPI code) appears on the display and a signal sounds once the base unit is found by the handset.
•Press the Programming key 
.
•‘PIN’ appears on the display.
•Enter the
•Press the Programming key 
.
•The handset is subscribed to the base unit.
4.25 Removing subscription of a handset to a base unit
It is possible to cancel subscription of a handset to a base unit. You would do this if a handset is damaged and has to be replaced by a new one.
You can only cancel subscription of another handset, not the handset you are using to do the cancellation procedure.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘REMOVE HS’ appears on the display.
•Press the Programming key 
.
•‘PIN’ appears on the display.
•Enter your
•Press the Programming key 
.
•‘REMOVE HS’ appears on the display.
•Dial the number of the handset you want to remove (1
•Press the Programming key 
.
•‘REMOVE HS’ appears on the display and the handset is removed
•NOT SUB’ appears on the handset removed.
4.26 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4) , you must select a base unit because the handset can only communicate with one base unit at a time. There are two possibilities:
4.26.1 Automatic selection
If you set the handset to ‘automatic selection’, the handset will automatically choose the closest base unit in standby.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘BASE SEL’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘AUTO’ appears on the display.
24 | Topcom Butler 4011/4011C Sim |
