TOPCOM BPM Arm 5100
7Measurement
7.1Important tips
•This monitor automatically switches off 2 minutes after the last key operation.
•To interrupt the measurement, simply press any key. The cuff will deflate immediately after a key is pressed.
•Do not measure your blood pressure immediately after consuming a large meal. To obtain more accurate readings, please wait one hour before measuring.
•Do not smoke or drink alcohol before measuring your blood pressure.
•You should not be physically tired or exhausted while taking a measurement.
•It is important that you relax during measurement. Try to take
•Do not take measurements if you are under stress or under tension.
•Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait a while before taking a measurement.
•If the monitor is stored at very low temperature (near freezing), have it placed at a warm location for at least one hour before using it.
•Wait about 5 minutes before taking the next pressure measurement.
•During the measurement, do not talk or move your arm or hand muscles.
7.2Procedure
•Press the START/STOP button 
to activate the device.
All segments will be displayed.
• Once the actual Memory zone is displayed
• If no button is pressed within 5 seconds, the measurement will start automatically.
• The display will show the last measurement result before inflating the cuff to the level that is right for you.
•When the right level is reached, the cuff will deflate. This monitor will
•When the measurement is completed, systolic, diastolic
and pulse will be shown simultaneously on the LCD screen.
• The blood pressure classification indicator will be displayed.
•When an irregular heartbeat is detected, ‘ 
’ is displayed.
•When a mistake was detected during measurement the Error icon ‘EE’ appears on the display
ENGLISH
7
