Topcom Butler 5400
ENGLISH
Topcom Butler 5400 95
Enter the PABX access code, e.g. ‘0’ and press OK.
Scroll to ON and press OK.
Press and hold BACK to return to standby.
8 BASE SETTINGS

8.1 RINGTONE AND VOLUME

8.1.1 Ringtone
You can choose 5 different ringer melodies:
From the standby screen, press MENU then scroll to Base settings and press OK.
•Press OK againto enter the Base Ringtone menu.
Scroll or to the melody you want. During scrolling a sample is played. Press OK to select or BACK to
return to the previous menu.
Press and hold BACK to return to standby.
8.1.2 Ringer volume
There are five base ringer volume levels and Off.
From the standby screen, press MENU then scroll to Base settings and press OK.
Scroll to Base Volume and press OK.
The current setting is displayed. Press to increase or to decrease the volume. Press OK to confirm.
Press and hold BACK to return to standby.

8.2 HANDSET PRIORITY

Normally, if you have more than one handset registered to your base, they all ring at the same time. However, you can
set one of them to ring before the others, so that calls can always be answered at one handset first.
From the standby screen, press MENU then scroll to Base settings and press OK.
Scroll to Handset Priority and press OK. Display highlights All Handsets. Press OK to select All Handsets
to make all handsets ring together.
Or
Scroll to Select Handset and press OK. Scroll or to the handset you want to ring first. Press OK.
Scroll or to select the number of rings at the handset before the other handsets start ringing. Press OK
to confirm.

8.3 LINE SETTINGS

8.3.1 Flash time
•Press MENU then scroll to Base Settings and press OK. Scroll to Recall Mode and press OK.
Press or to highlight Recall 1 for short flash time (100ms)or Recall 2 for long flash time (250ms) and
press OK to confirm.

8.4 SYSTEM PIN

The System PIN is used for registering and deregistering handsets and some other optional settings. The default
System PIN is 0000.
•Press MENU then scroll to Base Settings and press OK. Scroll to System Pin and press OK.
Enter the current PIN (Original setting 0000) and press OK.
Enter the new PIN, press OKand enter it again.
•Press OK to confirm.

8.5 SIM COUNTRY CODE SETTINGS

You can program the Butler 5400 how to convert telephone numbers stored on your sim card when copying them to
your handset phonebook memory (See § “4 Phonebook” ).
There are 3 rules how the convertion will be done:
1. If a number stored in the SIM card begins with '+' or '00', and the country code on the SIM number matches with the
programmed country code of the handset in this case, those caracters are replaced by the programmed national
code.