Topcom Butler M1250/Twin/Triple/Quattro
10 Reset of the phone
This will undo all changes and set back all default settings (ringer volume, ringer melody, etc). Press menu button 
Scroll to ‘System’ and press 
Scroll to ‘RESET’ and press OK Enter the PIN code (default=’0000’) and press 
The unit will go back to standby.
Default handset settings are: |
|
Handset volume | 3 |
Handset melody | 3 |
Flash time | Recall 1 |
Dial mode | Tone |
AutoAnswer | On |
Keypad tone | On |
Receiver volume | 2 |
PIN code | ‘0000’ |
ECO mode | OFF |
All memories (redial, phonebook, call log,...) and handset name will not be erased!
11 Answering machine
The Butler M1250 has a
14 minutes The answering machine can be operated remotely and features the possibility of recording your own outgoing messages (OGM 1) (maximum of 40 seconds).
There are 2 possibilities:
•With OGM 1, the caller has the possibility to leave a message
•When memory is full, OGM 2 is activated. This
played without the caller having the opportunity to leave a message The max. recording time for each incoming message is 2 minutes
11.1 LED display
The LED display on the base indicates how many messages you have received. When there are new messages, the LED display on the base will blink and only indicate the amount of new messages. If the answering machine is switched off, the LED display does not light up. ‘FL’ will be shown on the display when the internal memory is full and no new messages can be recorded.
11.2 Setting the voice prompt language
The Butler M1250 has 4 voice prompt languages (see packing which languages are selectable) used for the
Press menu button 
Use the down 
button to scroll to ‘Settings’ and press 
Use the up 
or down 
button and select ‘DTAM’ Use the up 
or down 
button and select ‘TAM Languages’ The currect language is shown Use the up 
or down 
button to select the language Press the menu/OK button 
to confirm.
ENGLISH
Topcom Butler M1250/Twin/Triple/Quattro | 12 |
