Topcom Triple, Quatro, Twin, 4270 manual Getting started, Installing the base, Installing the handset

Topcom Butler 4270/Twin/Triple/Quattro

1 Getting started

1.1Installing the base

For installation, do the following:

•Plug one end of the adaptor into the outlet and the other end into the adapter jack on the bottom of the telephone.

•Connect one end of the telephone cord with the wall phone jack and the other end to the bottom of the telephone.

TEL

Telephone cord

Power cable

1.2Installing the handset

•Open the battery compartment (see below).

•Insert the batteries respecting the (+ and -) polarity.

•Close the battery compartment.

•Leave the handset on the base unit for 20 hours. The charge indicator (LED) on the base unit will light up.

back view of hand-set Cover

	-
+	+ Rechargeable
	Batteries
	-

Before you use the telephone for the first time, you must first make sure the battery is charged for 20 hours. If you do not do this, the telephone will not work optimally.

6 Topcom Butler 4270/Twin/Triple/Quattro