Topcom WBR 7011 B manual Connection Panel, English

Topcom Wireless Broadband Router WBR 7011b

1 THE CONNECTION PANEL

ENGLISH

1Z VDC 4 3 2 1 WAN Reset

*POWER 12V DC: The power port is to connect the 12 V DC (1000mA) power adapter.

--> The power LED on the front panel will go ON when the power adapter is connected.

*WAN: The WAN Ethernet port is to connect your ASDL/Cable modem.

--> The WAN LED will go ON if the network Ethernet cable is properly connected.

*Ports 1- 4: This is to connect networked devices, such as PCs, ftp servers or anything else you want to put on your network.

--> The LAN LED’s will indicate the connection status.

*Reset Button: If you would like to load default settings, press the reset button and hold it for at least 4 seconds. It will load the factory default settings for the device. Do not press the reset button unless you want to clear the current data.

Topcom Wireless Broadband Router WBR 7011b 3