Connect your router
English
1Connect your router
Please connect your router according to the diagram below
English
USB HDD
USB PRINTER
USB
FLASH
OR | DSL/CABLE |
| MODEM |
Reset USB 2 USB 1
•POWER: The power port is to connect the 12V DC power adapter.
The power LED on the front panel will go ON when the power adapter is connected.
•WAN: The WAN port is to connect your Cable/DSL modem. The link LED in the front panel will indicate that the ADSL line is connected.
The WAN LED will go ON if the network Ethernet cable is properly connected.
•Ports 1- 4: This is to connect up to 4 pc's or other network devices.
The LAN LED's will indicate the connection status.
•USB1 / USB 2: Connect your USB printer and/or your USB storage device to a USB port.
•Reset Button: To load default settings, press the reset button and hold it for 10 seconds. It will load the factory default settings for the device. Do not press the reset button unless you want to clear the current settings.
1
