Setup the Broadband Router

o PPPoE xDSL: Used for DSL bridge with PPPoE connection.

English

- IP Address info for PPPoE xDSL -

1Username: Enter your PPPoE username.

2Password: Enter your password.

3Service Name: Enter the service name (for example the name of your Internet Provider)

4MTU: Enter the MTU size (If the size is not specified by your Internet Provider, please leave the default value at 1492)

5Connection type:

Continuous: The PPP-connection will always be active.

Connect on Demand: The PPP-connection will establish when a computer is accessing the Internet. The PPP connection will disconnect when there is no more Internet traffic during the Idle Time (minutes), entered in the field below.

Manual: The PPP connection is established / disconnected manually by clicking Connect / Disconnect.

￿Click OK to proceed. (Go to “ Finishing the Broadband Connection Type Setup Wizard” on page 8)

5

Page 11
Image 11
Topcom WBR 7121 manual IP Address info for PPPoE xDSL, Connection type