Topcom WBR 7121 manual IP Address info for L2TP xDSL

Setup the Broadband Router

3PPTP Gateway: Enter the Gateway.

4Connection ID: Enter the Connection ID when necessary.

5MTU: Enter the MTU size (If the size is not specified by your internet provider, please leave the default value at 1492)

6BEZEQ-ISRAEL:Only for Israel

7Connection Type:

•Continuous: The PPP-connection will always be active

•Connect on Demand: The PPP-connection will establish when a computer is accessing the Internet. The PPP connection will disconnect when there is no more Internet traffic during the Idle Time (minutes), entered in the field below.

•Manual: The PPP connection is established / disconnected manually by clicking Connect / Disconnect.

￿Click Ok to proceed. (Go to “ Finishing the Broadband Connection Type Setup Wizard” on page 8)

o L2TP xDSL: used for cable modems with L2TP connection.

English

- IP Address info for L2TP xDSL -

•WAN Interface Settings: DHCP client or Fixed IP address

•Obtain an IP address automatically:

1Host Name: Enter your Host Name if necessary.

7