Topfield TF3100FEI, TF3100FEP PRO 13

	INSTALLATION (Connection)	Positioner model only

3. Connection to the dish. (Positioner model only)

3-1) Connection to an actuated dish

Connect the LNB IN socket of the STB to the LNB.

Connect motor wires to M1 and M2.

Switch these connections if the motor moves to the wrong direction. Connect sensor wires to PULSE and GND connector.

Connect a mechanical polarotor to +5V, GND and SKEW connectors.

Improper connetion cause malfunction or may break down your STB and Motor

3-2) Connection to an actuated dish with C/Ku switch .

Connect the cables from C and ku-band LNB to 12 Volt C/Ku switch.

Connect the coaxial cable from the

0/12 Volt switch to LNB IN connector. Connect the power cable which comes from the 0/12 Volt switch to the 0/12V connector. Connect motor wires to M1 and M2. Switch these connections if the motor

moves to the wrong direction.

Connect sensor wires to PULSE and GND connectors.

Connect a mechanical polarotor to +5V,GND and SKEW connectors.

INSTALLATION

Contents

- Embedded Positioner TABLE OF CONTENTS Page INTRODUCTION CONTENTS FEATURES (Non-Positionermodel) (Embedded Positioner model) REMOTE CONTROL UNIT (RCU) Page Page INSTALLATION (Connection) Page Page GETTING STARTED Information Box EPG (Electronic Program Guide) Subtitle Teletext Soundtrack Page Page A. Local Time Setting Mode Local Time GMT Time Offset B. Timer C. Wakeup Time D. Wakeup Channel E. Power Off Time F. Sleep Time I-2.PARENTAL CONTROL A.Censorship B.Change PIN Code C. Access Control I-3.LANGUAGE SETTING A. Menu Language B. Subtitle Language C. Audio Language I-4.A/V OUTPUT SETTING A. TV Type B. TV Aspect Ratio C. Display Format D. Sound Mode E. UHF Type F. UHF Channel I-5.OSD Transparency I-6.Info Box Display Time I-7.Info Box Position II. ORGANIZING CHANNELS A. Browse B. Rename C. Move D. Lock E. Skip F. Delete NOTE: Deleted channels are permanently deleted. The only way to reobtain is to perform a new channel search III. ORGANIZING FAVORITES Page Page E.12V F.DiSEqC G. Channel Search IV-2.Channel Search Page B. Search Mode C. Frequency D. Symbol Rate E. Polarization F. Network Search G. PID 1) Video PID 2) Audio PID 3) PCR PID I.Start Search J. LNB Setting STB Page Page Page Page Positioner Setting GuidePositioner model only 3) The Most Eastern Satellite 4) Program Satellites D. Manual Setting 1) Satellite Name Page IV-4 .Motorized DiSEqC . Satellite Name . Frequency . DiSEqC Command Mode . Movement . Motor Control . Channel Search IV-5.SAT/Tp Edit B. Frequency C. Symbol Rate D. Polarization E. SAT Name Edit Notes F. Add New TP G. Delete TP H. Add Satellite I. Delete Satellite J. Channel Search Page V.INFORAMTION V-1.IRD STATUS V-2.CALENDAR Page Page TROUBLESHOOTING (Q & A) Problem Possible Causes What to do SPECIFICATIONS(IRD) STB SPECIFICATIONS Item CHANNEL PROCESSING MPEG AUDIO VIDEO SPECIFICATIONS RF MODULATOR . POWER SUPPLY (Non-Positionermodel only)