Positioner Setting GuidePositioner model only3) The Most Eastern Satellite

. Repeat the first 2 steps(Satellite Name, Frequency) as listed above.

. Position dish : Press the

button to search and allocate the antenna to the adequate

position. The positioning procedure might not succeed the first time. (Repeat the

procedure, if it is needed.) As you press the

/

button, the cursor will subsequently

move to the left/right until it finds the matching position. As soon as the cursor finds the position, the signal quality (yellow bar) will appear.

. Align dish : In the position, peak the dish to obtain the highest signal quality using

the or buttons.

Press the red (F1) button to save it!

4) Program Satellites

Now go to the Satellite Name section and press to display the satellite list. Accordingly, check all satellites you want to positioned between the most western

and the most eastern satellite using the button. Press the red (F1) button to save it. Let the receiver calculate all intermediate satellite positions. All selected satellite positions are now stored.

The STB now has programmed the position of all selected satellites. Next step is to store all channels on the satellite. Under the same Dish Setting menu, go to the Channel Search section. Select the Start Search... section to launch the searching procedure and to store all channels.

Repeat this procedure for all satellites.

D. Manual Setting

1) Satellite Name : Press the button to display the satellite list. Choose the desirable most western satellite among the list by

highlighting it and pressing the button.

POSITIONER SETTING GUIDE