| Positioner Setting Guide | Positioner model only |
|
|
|
POSITIONER SETTING GUIDE
1) Most Western Satellite |
|
|
. Satellite Name : Press the | button to display the satellite list. Choose the desirable | |
most western satellite among the list by highlighting it and press the | button. | |
. Frequency : Press the | button to display the frequency list. Any frequency will | |
function. Please contact the installer or the service provider for more specific | ||
information. |
|
|
. Position dish : Press the | button to search and allocate the antenna to | the adequate |
position. The positioning procedure might not succeed the first time.
Repeat the procedure, if it is needed. As you press the 
/ 
buttons, the cursor will subsequently move to the left/right until it finds the matching position. As soon as the cursor finds the position, the signal quality(yellow bar) will appear. If the signal strenth is appear, the motor will be stopped.
. Align dish : In the position, move the dish to obtain the highest signal quality using the 
or 
buttons.
. Press the red (F1) button to save it!
NOTE: There could be an error, though rare, concerning the misplacement of east and west positions. Please check the position of the Antenna Positioner for the best solution.
2) Middle Satellite
. Repeat the first 2 steps(Satellite Name, Frequency) as listed above.
. Position dish : Press the 
button to search and allocate the antenna to the adequate position. The positioning procedure might not succeed the first time.
Repeat the procedure, if it is needed. As you press the 
/ 
button, the cursor will subsequently move to the left/right until it finds the matching position. As soon as the cursor finds the position, the signal quality (yellow bar) will appear. If the signal strenth is appear, the motor will be stopped.
. Align dish : In the position, move the dish to obtain the highest signal quality using
the 
or 
buttons.
. Press the red (F1) button to save it!