48 ListingServices
1.
Plug one end of a RS-232 cable (9 pin D-
sub cable) into the RS-232 port on the
digital receiver, and the other end into
thematching port on the other digital re-
ceiver.
2. Turn on the source digital receiver.
3.
Select the Installation
>
TransferData to
Other IRD menu, then you get asked for
confirmation;select Yes.
4.
Tostart the data transfer,turn on the target
digitalreceiver.
5.
A progress bar appears showing the
progressof the data transfer.
6.
Restartthe target digital receiver when the
datatransfer is complete.