Cub Cadet SC2400 manual Every 500 Hours, Periodic Service, Front Axle Case Oil, Avoid injury

14. PERIODIC SERVICE

8.Every 500 Hours

■Front Axle Case Oil

IMPORTANT:

●Make sure to use Cub Cadet GEAR LUBE or SAE 80W-90 gear oil for front axle case oil.

Front Axle Case Oil

Capacities	Lubricants
Approximately 2.6 US qt	Cub Cadet GEAR LUBE
(2.5 L)	or SAE 80W-90 gear oil

■Changing the Front Axle Case Oil

WARNING

Avoid injury:

●When draining away the front axle case oil that is still hot, stay clear of the hot transmission oil and other components to avoid burn.

1.Operate the tractor to warm up the front axle case oil.

2.Park the tractor safely.

NOTE:

●The front axle case contains approximately 2.6 US

qt (2.5 L) of oil.

●Be sure to change the oil in both right and left front axles.

3.Place drain pans underneath the axle drain plugs on both sides of the front axle.

4.Remove the axle drain plugs and allow the oil to fully drain.

5.Make sure that the oil has fully drained. Dispose of waste properly. Reinstall and tighten the drain plugs.

6.Remove the dipstick located on the right side of the front axle.

7.Add Cub Cadet GEAR LUBE or SAE 80W-90 gear oil through the fill port to the specified level.

8.Reinstall and tighten the dipstick.

9.Check the front axle case oil level again.

IMPORTANT: Avoid damage.

●Before checking the oil level, allow the oil to settle for 1 hour so that the current oil level can be accurately checked on the dipstick. Recheck the oil level after operating the tractor for several hours.

10.Again, check the axle case oil level.

(A)Axle drain plugs

(B)Dipstick

	(B)
3014922	(A)

Sc2400 Operator’s Manual 14-30