Cub Cadet SC2400 manual Checking the Wheel Bolt Tightening Torque, Checking the Inflation Pressure

14. PERIODIC SERVICE

■Checking the Wheel Bolt Tightening Torque

WARNING

Avoid injury:

●To prevent possible roll-over of the tractor, check the rim, hub and wheel bolts before starting day’s operation.

Before starting day's operation, check tightening torque of each of the tire wheel bolts and, if necessary, retighten to the specified torque. Check the tightening torque after the first 5, 15 and 50 hours and thereafter every 50 hours of operation. If necessary, retighten to the specified torque.

For the specified torque, refer to the following table.

Front wheel bolt (ft•lb (N•m))	52 - 59 (70 - 80)
Rear wheel bolt (ft•lb (N•m))	52 - 59 (70 - 80)

■Checking the Inflation Pressure

WARNING

●ALWAYS keep the tires inflated to the correct pressure. NEVER exceed the recommended inflation pressure specified in this Operator's Manual.

Adjust the front and rear tires to the standard pressure. Check the tires for fissures and any other damages. Before loader work, make sure to check the tire pressure and, if necessary, inflate the tire(s) to the recommended pressure.

(a)Too high

(b)Standard

(c)Too low

Inflation pressures

(a) (b) (c)

3130210

	Tire size	Inflation pressure	Inflation pressure when an implement such as the
			front loader has been attached to the front of the
		(psi(kgf/cm2))	machine (psi(kgf/cm2))
Front	18 × 8.50 - 10	20 (1.4)	22 (1.5)
Rear	26 × 12.00 - 12	20 (1.4)	22 (1.5)

Sc2400 Operator’s Manual 14-14