Cub Cadet SC2400 manual Inflation Pressure, Wheel Bolt Tightening Torque, 12-2, Avoid injury

12. TIRES, WHEELS AND BALLAST

■Inflation Pressure

WARNING

●ALWAYS keep the tires inflated to the correct pressure. NEVER exceed the recommended inflation pressure specified in this Operator's Manual.

Inflation pressure gradually reduces as time elapses. Check the pressure of each tire before starting the day's operation and inflate the tires as necessary to the recommended pressures. If the tire pressures significantly decrease though the tires are correctly inflated every day, immediately request your local Cub Cadet Yanmar dealer to inspect or replace the problem tire(s).

Before loader work, make sure to check the tire pressure and, if necessary, inflate the tire(s) to the recommended pressure.

For the appropriate inflation pressure, refer to the following table:

	Tire size	Inflation pressure	Inflation pressure when an implement such as the front
			loader has been attached to the front of the machine
		(psi(kgf/cm2))	(psi(kgf/cm2))
Front	18 × 8.50 - 10	20 (1.4)	22 (1.5)
Rear	26 × 12.00 - 12	20 (1.4)	22 (1.5)

■Wheel Bolt Tightening Torque

WARNING

Avoid injury:

●ALWAYS keep the wheel bolts tightening to the specified torque.

●With the wheel bolts loosened, do not drive the tractor.

Before starting day’s operation, check tightening torque of each of the tire wheel bolts and, if necessary, retighten to the specified torque. For the specified torque, refer to the following table:

Front wheel bolt (ft•lb (N•m))	52 - 59 (70 - 80)
Rear wheel bolt (ft•lb (N•m))	52 - 59 (70 - 80)

12-2 Sc2400 Operator’s Manual