Cub Cadet SC2400 manual Stopping Travel of the Tractor

8. OPERATING THE TRACTOR

3. Stopping Travel of the Tractor

1.Slowly remove foot from the forward side of the forward and reverse drive pedal or reverse side of the forward and reverse drive pedal.

2.Fully push the throttle control lever forward to decrease the engine speed.

3.Step on and depress the brake pedal.

4.After the tractor has completely stopped, turn off the Power Take Off (PTO) switch.

5.Lower the implement (if equipped) to the ground.

6.Engage the parking brake securely.

7.Run the engine at a lowest possible speed for at least for two minutes.

8.Turn the key to the OFF position.

9.Remove the key from the starter key switch.

10.Make sure that the engine and other rotating component(s) have stopped running. NEVER leave the operator’s seat while any component is running.

(A)Forward and reverse drive pedal

(B)Throttle control lever

(C)Power Take Off (PTO) switch

	(B)
3013703a	(A)

(C)

3014919b

■Emergency Stop Procedure

1.Remove foot from the forward side of the forward and reverse drive pedal or reverse side of the forward and reverse drive pedal.

2.Depress the brake pedal.

3.Turn the key to the OFF position.

4.Keep the brake pedal pressed until all the moving parts on the tractor come to a full stop.

5.Engage the parking brake securely.

Sc2400 Operator’s Manual 8-8