Cub Cadet SC2400 manual Parking Brake Safety Switch, Drive Pedal Safety Switch, Seat Safety Switch

14. PERIODIC SERVICE

2. Parking Brake Safety Switch

1.Disengage the parking brake.

2.Turn the key to the START position.

3.Make sure that the starter motor does not crank.

4.Turn the key to the OFF position.

5.Engage the parking brake securely.

6.Turn the key to the START position.

7.Make sure that the starter motor starts running.

3. Drive Pedal Safety Switch

1.Turn the key to the START position to run the engine.

2.Pull up the Power Take Off (PTO) switch to set it to the ON position.

3.Disengage the parking brake.

4.Slowly step on the reverse side of the forward and reverse drive pedal.

5.Make sure that the PTO is not running.

4. Drive Pedal and Seat Safety Switch

1.Turn the key to the START position to run the engine.

2.Make sure that the Power Take Off (PTO) switch is in the OFF position.

3.Raise up slightly off the seat (Do not get off the machine).

4.Slowly step on the drive pedal.

5.Make sure that the engine stops after around one second.

5. Seat Safety Switch

1.Turn the key to the START position to run the engine.

2.Pull up the Power Take Off (PTO) switch to set it to the ON position.

3.Raise up slightly off the seat (Do not get off the machine).

4.Make sure that the engine stops after around one second.

Sc2400 Operator’s Manual 14-12