Cub Cadet SC2400 Every 100 Hours, Periodic Service, Engine crankcase, IMPORTANT: Avoid damage

14. PERIODIC SERVICE

5. Every 100 Hours

■Engine Oil

Use an oil of the viscosity appropriate for the air temperature range expected until the next oil change interval.

Engine crankcase

Capacities	Lubricants
Approximately	API Service Classifications
	CF or higher
2.5 US qt (2.4 L)
	SAE 10W-30 or SAE 10W-40

The following oils are recommended:

■Changing the Engine Oil

3013738

WARNING

●When draining away the engine oil that is still hot, stay clear of the hot engine oil and other components to avoid burn.

IMPORTANT: Avoid damage.

Change the engine oil more frequently if the tractor is used in extremely demanding conditions:

●Extremely dusty conditions

●Frequent slow- or low-speed operation ●Frequent short trips

1.Run the engine to warm up the engine oil.

2.Park the tractor safely on a level surface.

3.Open the hood.

4.Place an engine oil pan beneath the engine oil drain plug.

(A) Drain plug P3014926

5.Remove the drain plug by turning counterclockwise.

6.Reinstall the drain plug. Do not over-tighten it.

7.Remove the oil fill cap.

8.Add approximately 2.5 US qt (2.4 L) of the engine oil.

9.Reinstall the oil fill cap.

10.Start and idle the engine to check for any leaks. 11.If there is any leakage, stop the engine, close the hood and contact your local Cub Cadet Yanmar

for technical assistance.

12.Check the engine oil level and add more as necessary.

13.Close the hood.

14-23

(A)

Sc2400 Operator’s Manual