Cub Cadet SC2400 manual Stopping the Engine

7. OPERATING THE ENGINE

2. Stopping the Engine

1.Remove foot from the forward and reverse drive pedal.

2.After the tractor has completely stopped, turn off the Power Take Off (PTO) switch, lower the implement (if installed) to the ground and then engage the parking brake securely.

3.Run the engine at a lowest possible speed for at least 2 minutes.

4.Turn the key to the OFF position.

5.Remove the key from the starter key switch.

6.Make sure that the engine and other components have stopped running. NEVER leave the operator’s seat while any components are running.

(A)Forward and reverse drive pedal

(B)Throttle control lever

(C)Power Take Off (PTO) switch

	(B)
3013703a	(A)

(C)

3014919c

7-8 Sc2400 Operator’s Manual