■Right Lift Link

10. 3-POINT HITCH

Right Lift Link

■Top LinkWARNING

Chock the four wheels to secure the tractor, before servicing the right lift link.

1.Lower the rear-mounted implement.

2.Safely stop the machine.

3.Loosen the locknut.

4.Turn the turnbuckle to adjust the right lift link length until the implement mounted to the 3-point hitch is level.

5.Retighten the locknut.

(A)Locknut

(B)Turnbuckle

Top Link

For adjusting the posture of the implement, use the top link. The posture can be adjusted by turning the turnbuckle to elongate or contract the link.

Installation position and length of the top link depend on the implement. Adjust them according to the instruction manual of the implement.

(A)

(B)

3014921

Sway Link

Adjust lateral sway of the implement by turning the turnbuckle of the sway links to elongate or contract the sway links.

1.Lower the rear-mounted implement.

2.Safely stop the machine.

3.Loosen the locknut.

4.Adjust the sway link length by turning the turnbuckle, so that the implement has proper lateral sway.

5.After adjusting the lateral sway of the implement, tighten the locknut.

(A)Locknut

(B)Turnbuckle

(C)Sway link

Hitch

■Sway LinkWARNING

Do not tow anything by the use of the top link or rear axle. Otherwise, the tractor can tip over to cause serious injury or death.

The hitch hole should only be used for towing light loads.

For maximum allowable weight to be towed, refer to "4. IMPLEMENT CAPACITIES".

Sc2400 Operator’s Manual

10-2

(A)(B)

(C)

P3014908

Page 66
Image 66
Cub Cadet SC2400 manual Right Lift Link, Top Link, Sway Link, Hitch, 10-2, Ab C, 10. 3-POINTHITCH, Sc2400 Operator’s Manual