10. 3-POINT HITCH

10. 3-POINT HITCH

10. 3-POINT HITCH

1. Adjusting the 3-Point HitchWARNING

ALWAYS install an appropriate counterbalance to the front of the tractor, if necessary, when using a 3- point hitch-mounted implement.

During transportation, put the 3-point hitch control / cutting height adjustment lever in its raised position and lock it with the position stop knob. Do not fully close the hydraulic flow control / stop knob.

ALWAYS use implements designed for a 3-point hitch. NEVER use unapproved implements with the 3-point hitch. Contact your local Cub Cadet Yanmar dealer for technical assistance.

1. Adjusting the 3-Point Hitch

Manual backgroundCAUTION

Avoid injury:

Make sure to stop the engine and then remove the key. Make sure that the engine has been stopped completely.

Make sure that no other parts are moving. If any part or component is still moving, wait until it comes to complete stop.

Installation / removal of an implement must be performed in a flat and solid place.

After the implement and the 3-point hitch have been installed, check for possible interference with the Power Take Off (PTO) shaft and other machine components. If interference is found, correct it.

(A)Rear-Power Take Off (PTO) shaft

(B)Left lift link

(C)Left lower link

(D)Sway links

(E)Right lower link

(F)Right lift link

(G)Top link retainer

(H) Top link

(A)

 

(H)

 

 

 

 

(G)

(B)

 

(F)

(C)

 

 

3014910a

(D)

(E)

 

 

10-1

Sc2400 Operator’s Manual

Page 65
Image 65
Cub Cadet SC2400 manual 10. 3-POINTHITCH, Adjusting the 3-PointHitch, Avoid injury, Sc2400 Operator’s Manual