Cub Cadet SC2400 manual Set the throttle control lever about

7. OPERATING THE ENGINE

9. Set the throttle control lever about
halfway.
(A) Throttle control lever	(b)
(a) To increase the engine speed, pull the throttle
control lever backward.	(A)
(b) To decrease the engine speed, push the throttle	(a)
control lever forward.
	3014903e

10.Insert the key into the starter key hole and turn the key to the ON position.

(A)OFF position:

The engine must not run.

(B)ON position:

When the key has been turned to this position, the engine oil pressure warning light and the alternator / battery charging light and the engine coolant warning light will illuminate.

(C) START position:

When the key is turned to this position, the starter starts turning the flywheel and then the engine begins to run. Once the engine has started, release the key.

(A)	(B)
	(C)
3014907a

(A)OFF position

(B)ON position

(C)START position

Sc2400 Operator’s Manual 7-5