Cub Cadet SC2400 manual Checking the Lights on the Instrument Panel, Operating The Engine

7. OPERATING THE ENGINE

■Checking the Lights on the Instrument Panel

When the key is turned to the ON position:

1.The engine oil pressure warning light turns ON.

2.The alternator / battery charging light turns ON.

(A)Engine oil pressure warning light

(B)Alternator / Battery charging light

NOTE:

●The engine oil pressure warning light turns off within 5 seconds after the engine is started.

●The alternator / battery charging light turns off within 10 seconds after the engine is started.

IMPORTANT: Avoid damage.

●When the engine oil pressure warning light does not turn OFF within 10 seconds after the engine is started, the engine oil pressure is too low. Immediately stop the engine and contact your local Cub Cadet Yanmar dealer for technical assistance.

●When the alternator / battery charging light does not turn OFF within 15 seconds after the engine is started, the power generated by the alternator is too low. Increase the engine speed to its maximum so as to increase the power. If the light still remains lit, immediately stop the engine and contact your local Cub Cadet Yanmar dealer for technical assistance.

(A)

(B)

3014905

11.Turn the key to the PREHEATING position and energize the glow plug to preheat the engine.

(A)Preheating position

(B)START position

Preheating time should be determined according to outside air temperature. For details, refer to the table below.

Temperature (°F (°C))	Preheating Time (sec.)
Over 32 (0)	2 to 3
Below 32 (0)	4

(A)

(B)

3014907

7-6 Sc2400 Operator’s Manual