Cub Cadet SC2400 manual Every 300 Hours

14. PERIODIC SERVICE

■Adjusting the Toe-in

Poorly adjusted toe-in can cause difficulty in steering action or abnormal sway of the steering wheel. Measure the dimensions A, A’, B and B’ on the front wheels, and check that the dimensional difference “A - B” “A’ - B’” falls in a range of 0 to 0.3 in. (0 to 7 mm). If this dimension is not met, loosen the locknuts on the right and left tie-rod ends, and adjust the length of threaded portions. When the toe-in falls in the range of 0 to 0.3 in. (0 to 7 mm), secure this adjustment by retightening the locknuts.

(C)Front axle

(D)Locknut

(Tightening torque: 44 to 51 ft•lb (59 to 69 N•m))

(E)Tie-rod

(a)Front

(b)Rear

B	B'
(E)	(E)
(a)
(b)
A	A'
2010682a
	(C)

(D)

P3014929

7.Every 300 Hours

■Transmission Oil

IMPORTANT: Avoid damage.

●Make sure to use Cub Cadet Hydraulic / Transmission Fluid for transmission.

Transmission

Capacities	Lubricants
Approximately	Cub Cadet Hydraulic /
2.0 US gal (7.5 L)	Transmission Fluid

Sc2400 Operator’s Manual 14-28